— Our project began with a conversation about replacing a
12-year-old digital console. I had some basic requirements for the
console, and wanted to expand the agility of our audio systems. It
evolved from there.
the heart of this Yea Network operation was a large 26-input console
in our main control room. We wanted to add a second room for
redundancy as well as a room for a show, “Country Music Night,”
that was renting our space.
need for a second studio was evident once we began to produce the
Dallas version of “Dish Nation TV.” This is a nightly,
Fox-syndicated Hollywood entertainment show. After production began,
we realized that we needed a second room to split off the radio show
while TV segments were being taped in the larger talk studio.
also wanted to have some sort of audio routing for our plant. I
needed to create multiple submixes of the show for archiving and
repurpose recording, as well as submixes and iso feeds to the six
audio channels feeding TV production in Los Angeles.
began to lay out the system on paper, which provided me an I/O count
in different rooms: talk studio, control room, TOC and production.
Once I had that, it was time to choose the system.
looked at them all and we decided on the Axia Element console system.
the heart of the Axia Element system is a PowerStation console
engine. The PowerStation provides audio I/O, GPIO and network
connectivity for each studio. In the event of a main switch failure,
both rooms can operate independently using audio ties for emergency
use, since the PowerStations contain their own network switch.
purchased dual PowerStations — Axia designates them as main and
aux. Together these units provide four mic ins, eight stereo analog
ins, two AES ins, plus six stereo line outs and two AES outs. These
outs can be used for program feeds, cue, headphone amps and monitors.
the software interface for the PowerStation’s I/O can be totally
configured, assigning devices and names and level settings. The dual
PowerStation configuration provides dual power sourcing for each unit
via its interconnect cable.
on the Web-based interface used to configure the Power Station, any
number of source profiles can be created to specify what sources are
available on what faders, as well as allowing a GPIO to be associated
with every source, so no matter which fader is used, the logic is
associated with the correct source. As part of this capability, mics
can come up on any fader and correctly mute the studio or control
great feature is that once a source is on the audio network, it can
be pulled up anywhere else on the Axia network. I have sources on the
talk studio PowerStation that are actually brought up and mixed in
the control room. I now have 96 pairs of empty audio multipairs.
audio sources were put onto the network via new Axia xNode
interfaces. Their half-rack footprint makes them easy to put in tight
locations, throw them on a bookshelf or wall-mount them in TOC. We
went with the rack-mount kits and have two units side-by-side in the
TOC racks. Their connection to the audio network was a homerun to the
PowerStations in each control room. If the Cisco 2960 switch fails,
I’m still on the air.
took things a step further by using Axia switches and button panels
to create an intercom system. Using Axia’s optional Pathfinder
server software, we are able to control the audio routing from button
panels at user mic positions as well as external locations like
production and screener positions. The push of a button at a user
position routes the mic to the right channel of the headphone
destination and mutes the mic to the console.
an example of this, we have a button on the control room console that
is designated “mics off.” Pushing this button provides a signal
to Pathfinder and it issues a series of module-off commands to the
Axia Element surface to turn off the host mics.
also flashes bright red when any of the mic pots are on and then goes
green when they are all off.
many folks won’t need this level of capability — heck, we run a
multi-person, nationally-syndicated morning show — the back-end
flexibility of Pathfinder eliminated multiple relay interfaces on the
TOC wall and under the old console.
can also monitor sessions on the console and provided automated
routing to destinations, depending on what mode the console is in.
For instance, the submix provided to the TV production team needed
one mic-isolated mix while on air, and another when the show is in
offline recording mode.
monitors the session state of the console and routes the audio
accordingly to the xNode output that is feeding to L.A.
multiple mixes, when you look at the Element surface, at first you
see only four program assigns. Don’t let that fool you. Your
mix-minus capabilities are virtually limitless. As sources are
assigned to the console, you can designate it as a codec. A mix-minus
is created for each of those codec sources or phone hybrids.
there are software Vmixes (virtual mixers) that can be created in the
PowerStation to combine source feeds into a new submix. These
submixes can appear as new sources on the console or be used to feed
monitor locations or streaming, etc. Pathfinder can activate a source
to the mix if you like.
you get things rolling, you will truly see the power in the Axia
Livewire IP network made possible by the Livewire connection on many
audio devices. Phone systems, external processing or ISDN codecs from
a number of manufacturers are simply connected to the audio network
and appear as sources on the network. I have an Omnia 8x processor —
its eight three-band Omnia processors combined into one 2 RU chassis.
Only one RJ-45 connector is needed for the eight stereo ins/outs for
the unit. All are available to the Livewire network.
once on the audio network, a PC can use a second Axia-approved NIC as
its audio card. Audio record and playback occurs via that second NIC.
This allows those machines to record anything on the network.
found that the Axia Element systems can be simple or as complex as we
need. We started simple and slowly began to add features once we saw
what it could do. Frequently we say, “What if we …” and Axia
Element gets it done.
information, contact Axia Audio in Ohio at (216) 241-7225 or visit