This box contains heavy work tools and for this reason does not
always travel with me
especially since it weighs almost 50 pounds!!!
| Quan. |
Description |
Notes on tool |
| 1x |
AMP BNC high compression coax connector crimp
tool model 6065 with changeable dies |
|
| 1x |
BUSS Fuse puller model FP-3 |
This is a plastic (intrinsically safe) cartridge
fuse puller for fuse sizes between 1 and 1 3/4 inch, which is
the most ordinary size for transmitter and pump fuse inputs |
| 1x |
BUSS Fuse puller model FP-4 |
This is a plastic (intrinsically safe) cartridge
fuse puller for fuse sizes between 1 3/4 inch and 2 inch, which
is for big size transmitter and pump fuse inputs |
| 1x |
GREENLEE 3/4 inch 'slugbuster' conduit punch with
3/4 inch, high torque bolt
and ball bearing pressure spacer |
|
| 1x |
GREENLEE 1 inch 'slugbuster' conduit punch with
3/4 inch, high torque bolt
and ball bearing pressure spacer |
|
| 1x |
CAL-HAWK 1/2 inch drive micrometer adjustable
torque wrench |
|
| 1x |
CRAFTSMAN 3/4 inch fixed ratchet driver with flip
head model VVH-4431 |
This is primarily for operating the conduit punches
but I have also used it to tighten down or loosen the bolts
associated with tower top antenna mounting poles |
| 1x |
CRAFTSMAN 1 inch socket for the 3/4 inch ratchet
above model G-47773 |
This size is for the 3/4-inch bolts used in the
conduit punches |
| 1x |
CRAFTSMAN 1 1/8 inch socket for the 3/4 inch ratchet
above model 19-47775 |
This size is for the ordinary 3/4 inch tower bolt |
| 1x |
CRAFTSMAN 3/8ths to 15/15ths inch small socket
set for the 3/4-inch ratchet
above model 34450 |
|
| 1x |
CHALLENGER 3/4 inch female to 1/2 inch male socket
drive adapter model 1653 |
|
| 1x |
ORBIT SPRINKLERS water pressure gauge 0-200 psi |
This gauge is for checking the water pressure
available to see if we have sufficient pressure/flow for water
cooler dummy loads and fire sprinklers |
|
1x
|
3/4 inch by 3 inch long with 16 thread extra high
strength tower bolt for 'true-ing up' worn nuts |
|
|
x
|
coax connectors for the crimp tool mentioned above |
|
